Enerdrive ePRO Combi Inverters and Chargers

$1,797.00$2,999.00

All-in-one combination of a DC to AC true sinewave inverter, an advanced multi-stage battery charger with a high speed AC transfer switch. The ePRO Inverter Charger has all this built into one compact, yet installer friendly enclosure.

Clear
Description

Enerdrive ePRO Combi Inverters and Chargers

The main task of the ePRO Combi Inverter Charger is to act as an uninterruptible AC power supply (UPS). In case of a grid/generator failure or disconnection, the ePRO Combi immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads.

All this is achieved so fast, that even very critical loads like computers will continue to operate without any problems. In case the grid/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter.

The connected loads are now supplied again by the grid/generator without any interruption.

Features

  • AC Input Power Boost, which temporarily assists weak AC input sources when the connected load needs more power than available from the grid or generator.
  • AC Input Current Limit, which limits the maximum current consumed from the AC input source by the ePRO Combi. This limit is user adjustable.
  • Power Factor Corrected AC Input, which optimizes energy efficiency and makes sure that the maximum amount of charging current is available from your AC source.
  • Intelligent 4-stage charge programs, user programmable to fit any battery type.
  • Fully programmable inverter, transfer switch and battery charger parameters, using the Dashboard for Windows software.
  • Programmable alarm relay, for optimal control of external devices like generator starting or selective load disconnection.
  • Freely assignable trigger input, which allows the user to control the ePRO Combi by external events.
  • Temperature controlled fans, to guarantee silent operation under less than full load conditions.
  • Temperature compensated battery charging, using the standard supplied battery temperature sensor for maximum battery lifetimes.
enerdrive-epro-combi-display-screen-shots-635
enerdrive-epro-combi-1800-open
enerdrive-epro-combi-1600

Universal Remote Control

The Universal Remote Control (URC) can be used to remotely readout all available parameters from your ePRO inverter/charger Combi, like charging current, output voltage, charge stage etc. It is also possible to put the Combi in standby mode or to wake it up again, besides being able to control the maximum charge current and the maximum AC input current. All information is shown on a clear white backlit graphical display.

enerdrive-universal-remote-page-image

Enerdrive ePRO Combi Inverters and Chargers Specifications


Model EPC 1600-12 EPC 1800-24
Output power 1300W 1400W
P10minutes 1600W 1800W
Psurge 2500W 3000W
Output voltage / frequency 230 Vac ± 2% / 50 Hz ± 0.05%
Output waveform True sinewave (THD < 5% 1 @ Pnom)
Input voltage (± 3% tolerance): Nominal 12V 24V
Range 10.5  – 16 Vdc 21  – 32 Vdc
Maximum efficiency 92% 94%
No load power consumption  [ASB] <10 W [2.0 W] <12 W [2.0 W]
Charger stage
AC input voltage 185 – 270 Vac / 45 – 65 Hz / PF > 0.95
Maximum continuous charging current 60A 35A
Standard charge voltage (bulk / float @ 25°C) 14.3V / 13.3V (programmable) 28.6V / 26.6V (programmable)
Charge algorithm IUoUoP, intelligent 4-stage, temperature compensated (programmable)
Model EPC 2000-12 EPC 3000-12 EPC 3500-24
Output power 1800W 2600W 2800W
P10minutes 2100W 3200W 3800W
Psurge 4000W 5000W 6500W
Output voltage / frequency 230 Vac ± 2% / 50 Hz ± 0.05%
Output waveform 230 Vac ± 2% / 50 Hz ± 0.05%
Input voltage (± 3% tolerance): Nominal 12V 12V 24V
Range 10.5  – 16 Vdc 10.5  – 16 Vdc 21  – 32 Vdc
Maximum efficiency 92% 92% 93%
No load power consumption  [ASB] <20 W [3.5 W] <20 W [3.5 W] <20 W [4.0 W]
Charger stage
AC input voltage 185 – 270 Vac / 45 – 65 Hz / PF > 0.95
Maximum continuous charging current 80A 120A 70A
Standard charge voltage (bulk / float @ 25°C) 14.3V / 13.3V (programmable) 14.3V / 13.3V (programmable) 28.6V / 26.6V (programmable)
Charge algorithm IUoUoP, intelligent 4-stage, temperature compensated (programmable)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Enerdrive ePRO Combi Inverters and Chargers”
About Enerdrive

Enerdrive Pty Ltd have been providing independent power systems to the Australian market for over 14 years. Our head office is located in Brisbane, Australia with branches in Sydney and Melbourne.

Enerdrive has the national coverage and buying power to supply all your independent power needs. We are proud to be Australian Distributors of the great range of power products from Blue Sea Systems, Delta Q, Fischer Panda Generators & Electric Propulsion Systems, Morningstar, Spectra Marine/Landbased Desalination Systems, TBS Electronics and Xantrex.

Enerdrive also supplies their own brand of tried and tested products like: Lithium Power Packs, ePOWER Chargers, Inverters & DC-DC Converters, eLITE and ePRO Battery Monitors, ePRO Inverter/Chargers, Magnasine Inverters, with more products in the pipe line.