The Enerdrive B-TEC ULTRA 100Ah 12V is the third-generation B-TEC lithium battery (product code EPL-100BT-12V-G3), superseding the earlier EPL-100BT-12V. It combines Grade-A prismatic LiFePO4 cells with an IP67-rated sealed housing, making it suitable for marine installations where the battery may be exposed to spray, humidity or wash-down.
Continuous discharge is rated at 150A at 25°C with a 500A peak for three seconds, and the cell pack is rated beyond 6,000 charge cycles at 80% depth of discharge. Battery safety is certified to IEC62619.
Monitoring and control are built in. A Bluetooth app for iOS and Android reports battery status, CAN/485 allows real-time monitoring and control from compatible systems, and an on-battery display shows state of charge in 25% increments. An integrated on/off button isolates the terminals for safe servicing, and a reset button restores a battery that has gone into low-voltage protection. A battery tray and strap are supplied.
Enerdrive is now part of Dometic Power Solutions, and current stock carries both brand marks.
Specifications
| Product Code | EPL-100BT-12V-G3 |
|---|---|
| Nominal Voltage | 12V |
| Nominal Capacity | 100Ah |
| Cell Chemistry | LiFePO4 — Grade-A prismatic cells |
| Continuous Discharge | 150A @ 25°C |
| Peak Discharge | 500A (3 seconds) |
| Cycle Life | Over 6,000 cycles @ 80% DOD |
| Ingress Protection | IP67 |
| Safety Certification | IEC62619 |
| Monitoring | Bluetooth app (iOS & Android); CAN/485 |
| Display | Built-in — state of charge in 25% increments |
| Terminal Isolation | Built-in on/off button |
| Low-Voltage Recovery | Built-in reset button |
| Supplied With | Battery tray and strap |
| Warranty | 5 years |
Please charge the battery fully before first use.
Would you like to know more?
Please complete our short form below to let us know the details of your enquiry
Reviews
There are no reviews yet.