Enerdrive ePOWER B-TEC 12V Lithium Battery Range

Available in 12v 100Ah, 125Ah and 200Ah capacities, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Enquire about this product

Nationwide Shipping & Support

Guaranteed Safe Checkout

Enerdrive ePOWER B-TEC 12V Lithium Battery Range
Enerdrive ePOWER B-TEC 12V Lithium Battery Range

    Call Back request

    Enerdrive ePOWER B-TEC Lithium Battery Available in 12v 100Ah, 125Ah and 200Ah capacities, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. With over 5 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup. Smart Phone Monitoring System The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
    • Battery Capacity
    • Battery Voltage
    • Battery Current (Amps)
    • Battery State of Charge (SOC)
    • Battery State of Health (SOH)
    • Battery Status
    • Individual Cell Voltage
    • Battery Temperature
    • Battery Cycles
    • Battery Alarms
    • Battery Event Information

    Enerdrive ePOWER B-TEC Lithium Battery Specifications


    Normal Specification EPL-100BT-12V EPL-125BT-12V EPL-200BT-12V
    Note: Specifications subject to change without notice.
    Nominal Voltage 12.8V
    Nominal Capacity 100Ah 125Ah 200Ah
    Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles
    Battery Charge Temperature 0 ̴ 45°C
    Normal Charge Voltage CV/CC* 14.40 ̴ 14.60V
    Standby (Float) Voltage 13.50 ̴ 13.80V
    Maximum Charge Current 50A @ 25°C for 30mins 60A @ 25°C for 30mins 150A @ 25°C for 30mins
    Recommended Charge Current for Maximum Life ≤33A ≤40A ≤60A
    Battery Discharge Temperature -20 ̴ 60°C
    Battery Output Voltage Range 11.00 ̴ 14.60V
    Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins 200A @ 25°C ±5°C for 30mins
    Pulse Discharge Current 450A for 1.0s
    Discharge Cut-off Voltage ≤11.20V
    Mechanical Characteristics
    Dimensions Length 318mm 485mm
    Width 165mm 170mm
    Height 215mm 245mm
    Weight Approx 12.6 Kg Approx 15.0 Kg Approx 25.0 Kg
    Storage Information
    Temperature & Humidity Range ≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH
    ≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH
    Self-discharge Rate ≤ 3% Per Month
     

    Would you like to know more?

    Please complete our short form below to let us know the details of your enquiry