The Hatteland Series X Generation 3 (G3) 27″ Maritime Multi Display (MMD) is a type-approved professional marine monitor built for demanding shipboard applications — bridge navigation, ECDIS, radar, automation and CCTV. The G3 generation adds upgraded I/O connectivity and a new video scaler while retaining the same physical footprint as its predecessors, so it drops straight into existing Series X G2 (HD 27T22) cut-outs (FormFit compatible).
Available in two configurations:
- Non-Touch (FOGA1A) — 27″ Full HD 1920 × 1080 (16:9)
- Multi-Touch (FOGP1A) — 27″ WUXGA 1920 × 1200 (16:10), Projected Capacitive touch with pen & glove support
Key features
- Glass Display Control™ (GDC) — power, OSD, brightness, hotkeys and ECDIS mode all operated through the sealed front glass
- IP66 front / IP22 rear ingress protection (EN 60529)
- Multi-power — accepts 100–240 V AC and 24 V DC simultaneously, with automatic uninterrupted switch-over
- Optically bonded panel (FOG) as standard — superior contrast and reduced reflectance in direct sunlight
- 350 cd/m² brightness, 3000:1 contrast, ±89° viewing angle, 16.7 million colours
- Comprehensive I/O — DisplayPort 1.4, HDMI 2.0, USB-C (DP 1.2), VGA; dual RS-422/485, RS-232, Ethernet RJ45
- ECDIS compliant as standard (27″ units)
- Type approved by DNV, BV, ABS, ClassNK, KR (CCS pending) — IEC 60945 4th Ed, IACS E10
Specifications
| Display size | 27.0″ widescreen |
| Native resolution | 1920 × 1080 (non-touch) / 1920 × 1200 (touch) |
| Panel | a-Si TFT active-matrix LCD, LED backlight, optically bonded (FOG) |
| Brightness / contrast | 350 cd/m² typ. / 3000:1 typ. |
| Touch | None (FOGA1A) / Projected Capacitive multi-touch, USB (FOGP1A) |
| Power input | 100–240 V AC 50/60 Hz + 24 V DC (multi-power, auto switch-over) |
| Power consumption | 28 W typical / 39 W maximum |
| Ingress protection | IP66 front / IP22 rear (EN 60529) |
| Video inputs | DisplayPort 1.4, HDMI 2.0, USB-C (DP 1.2), VGA/RGB D-SUB 15p |
| Serial / network | 2× RS-422/485, RS-232 D-SUB 9p, Ethernet RJ45 |
| Dimensions (W×H×D) | 650 × 437 × 69.5 mm |
| Weight | ~10.4 kg |
| Operating temperature | −15°C to +55°C |
| ECDIS compliance | Yes — standard on 27″ units |
| Type approvals | DNV, BV, ABS, ClassNK, KR, CCS (pending); IEC 60945 4th Ed, IACS E10, EU RO MR |
| FormFit | Direct retrofit into Series X G2 (HD 27T22) cut-outs |
| Mounting | Console (HD CMB SX2-E1), table (HD TMB SX1-C1), VESA (HD VED SX2-K1), flush/panel with IP66 gasket |
Would you like to know more?
Please complete our short form below to let us know the details of your enquiry
Reviews
There are no reviews yet.